Frontier TM5124 » Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
Search Inventory    Search Products & Site

Frontier TM5124

Double tap to zoom



  • Dual wheels provide consistent disking depth
  • Hydraulic wing control
  • Two-blade taper creates level soil surface
  • Transport locks provide secure transport


Manufacturer John Deere
Model TM5124
Width  4.2 m 
   13.67 ft, in. 
Ground clearance with base blades  20.3 cm 
   8 in. 
Wheel hub bearings  Dual Tapered Roller Bearings  
Height  4 m 
   13.2 ft 
Length  8.5 m 
   28 ft 
Approximate working width  7.2 m 
   23.5 ft, in. 
Maximum penetration  22.9 cm 
   9 in. 
Net  7842.6 kg 
   17290 lb 
Weight per disk blade  145.1 kg 
   320 lb 
Tractor requirements  
Recommended PTO hp range  ---  
Recommended drawbar hp range  164.1+ kW 
   220+ hp 
Type  Tandem double offset  
Duty  General Purpose  
Tube size  15.2x10.2x0.95 cm 
   6x4x0.375 in. 
Front hitch type  Spade  
Bolt-on rear hitch  ---  
Disk blades  
Spacing  26.7 cm 
   10.5 in. 
Quantity  58  
Type  ---  
Notched (front) Notched (rear)  Standard  
Smooth (front) Smooth (rear)  Optional  
Notched (front) Smooth (rear)  Optional  
Blade concavity  Standard: high  
   Optional: low  
Available blade sizes  
Blade option one  660x7.9 mm 
   26x0.312 in. 
Blade option two  711x7.9 mm 
   28x0.312 in. 
Blade option three  ---  
Blade option four  ---  
Blade option five  ---  
Blade option six  ---  
Disk gangs  
Front angle  3 Positions  
Rear angle  3 Positions  
Furrow fillers  ---  
Axle size  4.1 cm 
 1.625 in. 
 or 5.4 cm 
 2.125 in. 
Axle material  Round heat treated alloy steel, threaded on both ends  
Bearing type  Oil bath tapered roller  
Bearing wear plates  Standard  
Bearing standards  Welded, reinforced  
Scrapers  Adjustable  
Lighting and safety  
Markings  SMV  
Safety tow chain  Yes  
Lights  Yes  
Type  Eight implement  
Size  11L x 15 in. 8 ply  
Wheel hub type  8 Bolt  
Set-up time  
Labor hours  4 - 6 for two people  
Time period  1 year