Commercial Mowers Z925M Flex Fuel

Double tap to zoom



  • Michelin® X® Tweel® Turf rear tire solution for ZTrak™ Mowers eliminates downtime and reduces the cost of operation
  • Durable hydrostatic drive train that delivers better cooling and provides easy access 
  • Available Mulch On Demand™ deck 
  • Durable 7-Iron™ PRO decks pressed from a single piece of steel 
  • Three-year bumper-to-bumper warranty 
  • Spindle assembly provides greater performance and reliability 
  • Three seat choices that offer exceptional operator comfort
  • Powerful 25.0-hp (18.6-kW) commercial grade electronically fuel injected Flex Fuel engine delivers class-leading performance and efficiency


Manufacturer John Deere
Model Z925M Flex Fuel (2017)
Manufacturer  ---  
Model no.  FCV740  
Horsepower (gross)  At 3600 rpm, 25 hp 
   18.6 kW 
Displacement  45.6 cu in. 
   747 cc 
Cylinders  Two  
Crankcase capacity  With filter, 2 U.S. qt 
   1.9 L 
Oil filter  Full flow, replaceable  
Lubrication  Full pressure  
Cooling  Air  
Air cleaner  Heavy-duty canister type with safety element  
Pre-cleaner  Yes  
Fuel system  
Fuel type  Gasoline or ethanol blends up to E85  
Fuel consumption  Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal. 
   4.2-7.2 L/hr 
Fuel tank capacity  11.5 U.S. gal. 
   43.5 L 
Fuel tank switch/shut-off valve  Yes  
Electrical system  
Charge system  20 amp 
Battery voltage  12 V 
Cold cranking amp  300 amp 
Hour meter  Standard, digital  
Operator presence starting system  Brake-N-Go (hand)  
Wheel motors  Tuff Torq heavy-duty integrated piston wheel motor  
Travel speed  ---  
Forward  0-10 mph 
   0-16.1 km/h 
Reverse  0-4.5 mph 
   0-7.2 km/h 
Speed and direction control  Twin levers  
Hydraulic capacity  5.9 U.S. qt 
   5.6 L 
Filter  Internal, replaceable  
Hydraulic oil cooler    
Hydraulic pumps    
Drive tires  24x12-12 (54 in., 60 in.)  
Rear tires  ---  
Load rating  4 PR  
Dynamic braking  Twin levers  
Park brake  Internal wet disk integrated in the transmission  
Park brake actuation  Hand brake  
Type  Electro-magnetic 225 lb-ft 
   305 Nm 
Drive  V-belt  
Mower decks  
Available widths  54, 60 in. 
   137, 152 cm 
Deck construction  7-Iron PRO, one-piece stamped steel with reinforcements  
Deck thickness  7 gauge 
   0.179 in. 
   4.6 mm 
Discharge  Side, MOD  
Height-of-cut range  1-5.5 in. 
   2.54-14 cm 
Increments  0.25 in. 
   0.64 cm 
Cutting width  54, 60 in. 
   137, 152 cm 
Length  Varies by deck size  
Thickness  0.25 in. 
   0.64 cm 
Tip speed  Approximately 18,000 fpm 
   5,486 m/min 
Number  Three  
Caster wheel type  Flat free  
Caster wheel size  13x6.5-6  
Front anti-scalp rollers  RH, center, LH  
Rear anti-scalp rollers  Optional  
Length  84 in. 
   213 cm 
Width  With chute down, 68, 74 in. 
   173, 188 cm 
Height  With ROPS up, 73 in. 
   185 cm 
   With ROPS down, 47 in. 
   119 cm 
Weight  1,198 to 1,291 lb 
   543 to 586 kg 
Additional information  
Date collected  07-Nov-2016