Commercial Mowers Z915E » Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
Search Inventory    Search Products & Site

Commercial Mowers Z915E

Double tap to zoom



  • Durable hydrostatic drive train that delivers better cooling and provides easy access 
  • Michelin® X® Tweel® Turf rear tire solution for ZTrak™ Mowers eliminates downtime and reduces the cost of operation 
  • Seat choices that offer exceptional operator comfort 
  • Spindle assembly provides greater performance and reliability
  • Three-year bumper-to-bumper warranty
  • Durable 7-Iron™ II decks pressed from a single piece of steel 
  • Powerful 25.0-hp (18.6-kW) commercial grade engine delivers class-leading performance and efficiency


Manufacturer John Deere
Model Z915E (2017)
Manufacturer  ---  
Model no.  CV742  
Horsepower (gross)  At 3600 rpm 25 hp 
   18.6 kW 
Displacement  45.6 cu in. 
   747 cc 
Cylinders  Two  
Crankcase capacity  With filter 2 U.S. qt 
   1.9 L 
Oil filter  Full flow, replaceable  
Lubrication  Full pressure  
Cooling  Air  
Air cleaner  Heavy-duty canister type with safety element  
Pre-cleaner  Yes  
Fuel system  
Fuel type  Gasoline  
Fuel consumption  Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 
   4.2-7.2 L/hr 
Fuel tank capacity  11.5 U.S. gal. 
   43.5 L 
Fuel tank switch/shut-off valve  Yes  
Electrical system  
Charge system  15 amp 
Battery voltage  12 V 
Cold cranking amp  300 amp 
Hour meter  Standard, digital  
Operator presence starting system  Brake-N-Go (hand)  
Hydraulic pumps  Tuff Torq® heavy-duty integrated piston pump  
Wheel motors  Tuff Torq heavy-duty integrated piston wheel motor  
Travel speed  ---  
Forward  0-10 mph 
   0-16.1 km/h 
Reverse  0-4.5 mph 
   0-7.2 km/h 
Speed and direction control  Twin levers  
Hydraulic capacity  5.9 U.S. qt 
   5.6 L 
Hydraulic oil cooler  ---  
Filter  Internal, replaceable  
Drive tires  24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)  
Rear tires  ---  
Load rating  4 PR  
Dynamic braking  Twin levers  
Park brake  Internal wet disk integrated in the transmission  
Park brake actuation  Hand brake  
Type  Electro-magnetic 200 lb-ft 
   271 Nm 
Drive  V-belt  
Mower decks  
Available widths  48, 54, 60 in. 
   122, 137, 152 cm 
Deck construction  One-piece stamped steel with reinforcements  
Deck thickness  7 gauge 
 0.179 in. 
 4.6 mm 
Discharge  Side  
Height-of-cut range  1-5.5 in. 
   2.54-14 cm 
Increments  0.25 in. 
   0.64 cm 
Cutting width  48, 54, 60 in. 
   122, 137, 152 cm 
Length  Varies by deck size  
Thickness  0.25 in. 
   0.64 cm 
Tip speed  Approximately 18,000 fpm 
   5486 m/min 
Number  Three  
Caster wheel type  Pneumatic Front  
Caster wheel size  13x5-6  
Front anti-scalp rollers  RH, center, LH  
Rear anti-scalp rollers  Optional  
Length  84 in. 
   213 cm 
Width  With chute down 62, 68, 74 in. 
   157, 173, 188 cm 
Height  With ROPS up 73 in. 
 185 cm 
 With ROPS down 47 in. 
 119 cm 
Weight  1100 to 1178 lb 
   499 to 534 kg