Agriculture 8345RT

Double tap to zoom

 

Features

  • 345 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • CommandView™ III cab featuring the Generation 4 CommandCenter™

Specifications

Manufacturer John Deere
Model 8345RT
Official Test  
Nebraska Test number  Nebr. OECD 1973, Summary 734  
Engine  
Manufacturer  John Deere  
Engine family  ---  
Aspiration  Variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6 cylinders/9.0 L 
   549 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  758 L 
   200 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  At 2100 per SAE: 205 kW 
   275 hp 
Official PTO hp (kW) @ Rated rpm  At 2096 rpm: 207.93 kW 
   278.85 hp 
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  At 1800 rpm: 237.77 kW 
   318.85 hp 
Advertised Engine hp (kW) @ Rated speed  At 2100 per 97/68EC PS: 254 kW 
   345 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  At 1957 rpm: 198.90 kW 
   266.73 hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  At 1500 rpm: 1409 Nm 
   1039 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  At 1698 rpm: 40 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  ---  
Opt. Transmission; Forward/Reverse  ---  
Reverser  Right hand with IVT  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes, IVT  
Power Take-Off (PTO)  
Standard  45 mm 
   1.75 in. 
   20 spline, 1000 rpm 
Optional  ---  
PTO Speeds @ Engine rpm  At 2001 rpm: 1000 rpm 
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure and flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  166.6 L/min 
   44 gpm 
Optional  227.1 L/min 
   60 gpm 
Rated Flow @ One SCV, GPM (L/min.)  132 L/min 
   35 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  TBD - Nebraska Test  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2,900 psi 
Maximum Hydraulic Power, hp (kW)  TBD - Nebraska Test  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Four standard  
   Three or five optional  
Hitch Category (SAE Designation)  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  ---  
Final Drive  
Type  Inboard Planetary  
Differential controls  ---  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  ---  
Axle Type  Bar  
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Rigid (cab)  
Platform - Flat/Straddle  Flat  
Gearshift Location - Console/Floor  CommandArm  
Cab  ---  
Doors  One on left side  
Platform - Flat/Straddle  Flat  
dB(A) Rating  69.8 dBA 
Seat Suspension System  Air  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  2515 mm 
   99 in. 
Wheel Tread, Min. to Max. in. (mm)  Standard: 1829-3048 mm 
   72-120 in. 
   Optional: 2845-4064 mm 
   112-160 in. 
Turning Radius w/o Brakes, ft (m)  TBD  
Nebraska Test Unballasted w/Duals, lb (kg)  TBD - Nebraska Test  
Unballasted Weight, lb (kg)  Average shipping weight: 15,631 kg 
   34,460 lb 
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  ---  
Track widths  Standard: 635 mm 
   25 in. 
   Optional: 406 mm 
   16 in. 
   457 mm 
   18 in. 
   610 in. 
   24  
   762 mm 
   30 in. 
Miscellaneous  
Country of Manufacture  Waterloo, IA USA  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  ---