Agriculture 2038R

Double tap to zoom

 

Features

  • Powerful and fuel-efficient Tier IV Yanmar engine
  • AutoConnect™ Drive-over Mower Decks up to 72 inches
  • New model is on larger, heaver frame for added stability
  • Standard cruise control, 12-V outlet and premium seating

Specifications

Manufacturer John Deere
Model 2038R (2017)
Engine  
Family  GYDXL1.57TDA  
Manufacturer  Yanmar  
Engine model  3TNV88C-NJT  
Engine power (gross)  27.4 kW 
   37.3 hp 
   SAE J1995 rated power  
Power take-off (PTO) power  22.7 kW 
   30.4 hp 
Rated engine speed  2500 rpm 
Type  Direct Injection  
Injection pump type  Direct Injection  
Aspiration  Turbocharged  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.568 L 
   3 / 95.8 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  86x90 mm 
   3.39x3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  101.4 Nm 
   74.8 lb-ft 
Fuel tank capacity  32 L 
   8.5 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  85 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  Direct Injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic transmission (HST)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  880 kg 
   1940 lb 
Rear  1089 kg 
   2400 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  35.2 L/min 
   9.3 gpm 
Steering  15 L/min 
   4 gpm 
Implement  20.2 L/min 
   5.3 gpm 
Pump type  Gear  
Maximum operating pressure  172.37 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to three  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  615 kg 
   1356 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2000 rpm 
Optional  ---  
Control  Independent  
Clutch  Independent  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.5 L 
   4.8 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Spur Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  ASABE S478  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  172.5 cm 
   67.9 in. 
Front axle clearance  ---  
Turning radius with brakes  2.75 m 
   9.02 ft 
Turning radius without brakes  3 m 
   9.84 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1105 kg 
   2436 lb 
Tires  
Front  R1 Ag 7.00-12  
   R3 Turf 23x8.50-14  
   R4 Industrial 23x8.50-14  
   R3 Turf Radial 200/60 R15  
Rear  R1 Ag 12.4-16  
   R3 Turf 14-17.5  
   R4 Industrial 14-17.5  
   R3 Turf Radial 300/70 R20  
Front tread range  ---  
Rear tread spacing  ---  
Miscellaneous  
Toolbox  Yes  
Tilt steering wheel  Yes  
12-V Outlet  Yes  
Date collected  ---