Agriculture 735D » Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
     
Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
Search Inventory    Search Products & Site
     
Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
Columbus
(609) 288-6637
2885 Route 206 South, Bldg. 4
Columbus, NJ 08022
Call Us
Directions
Elmer
(856) 358-2880
670 Route 40
Elmer, NJ 08318
Call Us
Directions
Marlboro
(732) 938-6677
65 State Route 34 unit 1
Marlboro, NJ 07746
Call Us
Directions
Hammonton
(609) 704-9440
100 US Route 206
Hammonton, NJ 08037
Call Us
Directions
Columbia
(908) 362-6916
228 Route 94
Columbia, NJ 07832
Call Us
Directions
Browse Inventory »
JD Parts »

Agriculture 735D

All Product Lines / John Deere / Agriculture / Grain Harvesting / Self-Propelled Windrowers / 700D Draper Platforms / 735D

Double tap to zoom

 

Features

  • Windrowing capability with 700D Drapers
  • Double-cut knife system produces a cleaner cut
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor

Specifications

CUTTERBAR  
Type Straight line knife drive system
Length 35.5 ft (10.8 m)
Knife drive Dual knife base
Knife speed 490 cycles/min
Cutterbar tilt Base hydraulic, 9 degrees tilt maximum
PICKUP REEL  
Number of slats 6 bat poly base
Fingers Nylon
Diameter 42 in. (1,067 mm)
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke 13 in. (330 mm); Total range 15.4 in. (391.5 mm)
Reel fore and aft Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm)
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Operating speeds (54-in. reel) ---
SLAT REEL  
Number of slats ---
Diameter ---
Height control ---
Speed control ---
Operating speeds ---
DRAPER BELTS  
Width Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration
Clean height Cleats 1 in. (25.4 mm)
Operating speed Side belts; variable up to 223 m/min (735 fpm); Center belts 212 m/min (695 fpm); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
FEED DRUM  
Diameter 16 in. (406 mm) Feed drum not included with SPW configuration
Feed drum fingers Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 6 in. (152 mm)
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base
HEADER HEIGHT SENSING  
Type Electro-hydraulic, base
Header height sensing on the ground Base
Header height sensing off the ground Base
AUXILIARY TOP AUGER  
Type Optional, hydraulic drive
DIMENSIONS  
Platform length 37.9 ft (11.6 m)
Overall operating depth 8.2 ft (2.5 m)
Transport width, field position 37.5 ft (11.4 m)
Transport width on wheel, less dividers 8.9 ft (2.7 m)
Transport length, hitch extended 45.4 ft (13.8 m)
WEIGHT  
Approximate weight (slat reel) ---
Approximate weight (pickup reel) Combine only 7,746 lb (3,514 kg); SPW only 6,423 lb (2,914 kg)
Approximate weight (with transport) Combine only 8,136 lb (3,690 kg); SPW only 6,813 lb (3,091 kg)
Approximate weight (optional 54-in. reel) ---
ADDITIONAL INFORMATION  
Date collected ---