Agriculture 625D Draper » Columbus, Elmer, Marlboro, Hammonton, Columbia, NJ
Search Inventory    Search Products & Site

Agriculture 625D Draper

Double tap to zoom



  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground


Manufacturer John Deere
Model 625D
Type  Straight line knife drive system  
Length  7.8 m 
   25.5 ft 
Knife drive  Base single, optional dual knife (combine use only)  
   Base dual knife (SPW only or SPW/combine combination use)  
Knife speed  490 cycles/min 
   1,040 spm 
Cutterbar tilt  Base Hydraulic, 9 degrees tilt maximum  
Pickup reel  
Number of slats  6 bat poly base  
   8 bat steel optional (for forage conditions)  
Fingers  Nylon (steel optional, typically used in rice or forage conditions)  
Diameter  1,067 mm 
   42 in. 
   For rice or forage conditions 1,371 mm 
   54 in. 
Height control  Hydraulic  
Speed control  Hydraulic  
Reel lift  Cylinder stroke 330 mm 
   13 in. 
   Total range 391.5 mm 
   15.4 in. 
Reel fore and aft  Cylinder stroke 359 mm 
   14.1 in. 
   Total range 620 mm 
   24.4 in. 
Reel resume  Base  
Reel reverse  Base  
Operating speeds  6-54 rpm 
Operating speeds (54-in. reel)  5-44 rpm 
Slat reel  
Number of slats  ---  
Diameter  ---  
Height control  ---  
Speed control  ---  
Operating speeds  ---  
Draper belts  
Width  0.7 L 
   24 oz 
   rubber coated polyester with V-Guide tracking  
   Side belts 1,016 mm 
   40 in. 
   Center belts 1,397 mm 
   55 in. 
   Center belt not included with SPW configuration  
Clean height  25.4 mm 
   1 in. 
Operating speed  Side belts: variable up to 223 m/min 
   735 fpm 
   Center belts: 212 m/min 
   695 fpm 
   Center belt not included with SPW configuration  
Speed control  Hydraulic from cab  
Center belt reverse  Base; Center belt not included with SPW configuration  
Feed drum  
Diameter  406 mm 
   16 in. 
   Feed drum not included with SPW configuration  
Feed drum fingers  Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer  
Number of fingers  18  
Auger finger platform  Dual chevron, retracting  
Finger reach  152 mm 
   6 in. 
Drum/auger reverse  Base  
Operating speed  195 rpm 
Center clean out door  Base  
Header height sensing  
Type  Electro-hydraulic base  
Header height sensing on the ground  Base  
Header height sensing off the ground  ---  
Auxiliary top auger  
Type  Optional hydraulic drive  
Platform length  8.5 m 
   27.9 ft 
Overall operating depth  2.4 m 
   7.9 ft 
Transport width, field position  8.1 m 
   26.5 ft 
Transport width on wheel, less dividers  ---  
Transport length, hitch extended  ---  
Approximate weight (slat reel)  ---  
Approximate weight (pickup reel)  Combine only 2,884 kg 
   6,359 lb 
   SPW only 2,284 kg 
   5,036 lb 
Approximate weight (with transport)  ---  
Approximate weight (optional 54-in. reel)  Combine only 2,974 kg 
   6,556 lb 
   SPW only 2,374 kg 
   5,234 lb 
Additional information  
Date collected